Ion Blaster Beam™

Blow-off Dust & Debris From Statically Charged Surfaces, Cone Shaped Profile, for Inside Plastic Pipe, Curved Surfaces Containers


The Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It’s compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an “air amplifier” (Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.

In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit “plastic PET head” of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.


  • Effective Static Elimination
  • Can clean static free dust at a distance
  • Compact design to fit in small spaces
  • Stand is pre-drilled for easy mounting


  • Low compressed air use
  • Rapid static decay
  • Quiet Operation
  • Shockless and non-radioactive
  • Compact and rugged design
  • Intake may be ducted to bring in atmospheric air from another area
  • No moving parts and minimal maintenance
  • Variable flow and force


  • Eliminate static charge and cleaning parts
  • neutralize shrink wrap
  • Form fill and seal applications for bag opening
  • Neutralizing and cleaning the inside of blow molded parts
  • Eliminate static and cleaning of plastic assemblies
  • Dust removal from parts prior to painting
  • Remove static charge in slitting applications
  • Cleaning of packaging
  • Neutralization of static charge inside containers.


Certification: North American Power Supplies certified to UL and CSA standards and Spot Ionizer used with the Ion Blaster beam is included with the certification. European Power Supplies CE approved and Spot Ionizer used with the Ion Blaster Beam is included with the certification. Stainless steel emitters on the ionizer.

Electrical: For use with 7 kV rms, 5 milliamperes (max) power supply which will last much longer than 5 kv power supplies.

Electrical Hazard: Shockless (less or eualt to 5mA)

Maximum Ambient Temperature: 122 degrees F or 50 degrees C.

Part # Description
17040 Ion Blaster Beam™ includes Air Amplifier, Spot Ionizers, Stand and 2 meters shielded cable
17140 Ion Blaster Beam™ and Power Supply
17340 Ion Blaster Beam™ Kit (c/w Ion Blaster Beam™, Power supply, Model 90001 water removal filter and Model 90008 regulator wi. gauge
80111 120 V Power Supply, 2 outlet
80121 230 V Power Supply, 2 outlet
80112 120 V Power Supply, 4 outlet
80122 230 V Power Supply, 4 outlet
90001 Water Removal Filter c/w auto Drain
90008 Regulator with gauge


Power Supplies

Ion Blaster Beam™ power supplies are available in various models including a unit that will monitor the static bars for effectiveness.


Voltage Model# Description
110V ENC-110/2 Two outlet (Can connect two static bars)
220V ENC-220/2 Two outlet (Can connect two static bars)
110V ENC-110/4 Four outlet (Can connect four static bars)
220V ENC-220/4 Four outlet (Can connect four static bars)
110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
220V Multistat 220 Four outlet (Can connect four)

Request Info

Nex Flow™ Products, Co. Ltd Bangna Residence Tower Unit No 207 324/35 Sanpawut Rd, Bangkok 10260, Thailand
Tel: 66 (0) 84 771 1224