Stainless Steel Standard Air Blade™ Air Knives

Replace Drilled Pipe Blow-off & Cool with Even Flow


The Standard Stainless Steel Air Knife from Nex Flow™ is easy to install and maintain. It can reduce both compressed air consumption and noise levels. used to blow off liquid or debris from products as they travel on conveyors.

Built and designed for significantly longer life in difficult environments than many competing products. Flexible mounting options and easy to fit in small spaces. Energy reduction in compressed air use up to 90% and noise reductions of 10 dbA. Maintenance free with output easily controlled, safe to use.

It produces a “laminar” flow of air using the Coanda effect. This draws a large volume of air from the surrounding area along with the small amount of compressed air from the Air-Blade. It also produces an output flow up to 30 times.


  • Part drying after wash
  • Sheet cleaning in strip mills
  • Conveyor cleaning
  • Part or component cooling
  • Web drying or cleaning
  • Environmental separation
  • Pre-paint blowoff
  • Bag opening/filling operations
  • Scrap removal on converting operations


  • Quiet – 69 dBA for most applications
  • 30:1 air amplification
  • Uniform airflow across entire length
  • Variable force and flow
  • No moving parts – maintenance free
  • Easy mounting
  • Compact, rugged, easy to install
  • Stainless steel screws in all models


NOTE : Force and Velocity at 6″(152mm) from target

** NOTE : Force and Velocity at 6″(152mm) from target **


The Stainless Steel Standard Air-Blade™ Air Knife is available in eight standard lengths: 3″ (76mm) , 6″ (150mm) , 8″ (203mm), 12″ (300mm), 18″ (457mm), 24″ (609.5mm), 30″ (761mm), 36″ (914mm)

Special lengths of our Air-Blade™ are available on special order including lengths combining several units.

(Extra Middle mounting hole only on the 36″ Air-Blade™ 457mm from each end)

Air-Blade™ comes with a standard machined .002″ outlet gap which will work for 90% of all applications encountered. If greater force is required, a .002″ shim may be installed to open the gap for greater flow. Constructed in either coated Aluminium or Stainless Steel.

Request Info

Nex Flow™ Products, Co. Ltd Bangna Residence Tower Unit No 207 324/35 Sanpawut Rd, Bangkok 10260, Thailand
Tel: 66 (0) 84 771 1224

Product Brochure
Installation and Maintenance
CAD Drawings