Air Flow MetersMonitor & Measure Compressed Air Use
The X-Stream™ Air Flow Meter represents a radical departure from conventional air flow meter designs, providing easy installation, low cost and accurate of the probes in the air stream.
The X-Stream™ Air Flow Meter clamps around a pipe with its probes projecting into the pipe through drilled holes. The low cost of the air flow meter makes it ideal for installation at points throughout the air distribution system to track valuable compressed air and assess system operation.
The X-Stream™ Air Flow Meter clamps onto a pipe, with two sensing probes projecting into the pipe through 3/16″ drilled holes. It seals directly into the pipe; no cutting or welding is required for installation. Because each air flow meter is made and calibrated for a specific size of pipe, the digital display indicates the air flow directly, with no setup or adjustment.
The X-Stream™ Air Flow Meter measures airflow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required and then calculates airflow on basis of pipe area. The flow rate, in SCFM, is shown on a large 4 digit display; a 4-20 mA output and pulse output permit remote display, totalizing and data collection. Metric display is optional.
- Reliable, durable thermal mass flow technology
- Milliamp and pulse outputs for logging and remote monitoring
- 100:1 turndown capability
- Available for steel pipe, ½” through 2”
- No calibration or setup required
- Complete flow meter in one package
|90092||1” (Schedule 40 iron pipe) 1 – 80 SCFM without Drill Guide Kit|
|90093||1.5” (Schedule 40 iron pipe) 2 – 200 SCFM without Drill Guide Kit|
|90095||2” (Schedule 40 iron pipe) 3 – 300 SCFM without Drill Guide Kit|
|DRG-9||Drill Guide Kit Only|
|90092-DRG-9||1” (Schedule 40 iron pipe) 1 – 80 SCFM with Drill Guide Kit|
|90093-DRG-9||1.5” (Schedule 40 iron pipe) 2 – 200 SCFM with Drill Guide Kit|
|90095-DRG-9||2” (Schedule 40 iron pipe) 3 – 300 SCFM with Drill Guide Kit|
|ABOVE FOR AMERICAN STANDARD STEEL PIPING – CAN ALSO SUPPLY TO DIN STANDARD OTHER PIPE SIZES & COPPER. QUOTE ON REQUEST|
|Accuracy||5 percent of reading plus one percent of full scale at air temperatures between 40 F and 120 F|
|Fluids||Compressed air and nitrogen|
|Operating pressure||30 to 170 psig for best accuracy 200 psig maximum on Schedule 40 steel.|
|Input power||250 mA at 18 to 24 Vdc|
|Output resistance||400 Ohms max.|
|Wetted materials :||Stainless steel, gold, thermal epoxy and Viton (seal)|
|Display||Four-digit LED display|
|Response time||One second to 63 percent of final value|
|US Patent 6,802,217|
Nex Flow™ Products, Co. Ltd Bangna Residence Tower Unit No 207 324/35 Sanpawut Rd, Bangkok 10260, Thailand
Tel: 66 (0) 84 771 1224