Wogaard Coolant Saver plus 660mm Vacuum Protector

The Wogaard Coolant Saver is for reclaiming coolant of a viscosity up to 12 centistokes.


The Wogaard Coolant Saver is for reclaiming coolant of a viscosity up to 12 centistokes.

With this Wogaard Coolant Saver plus Vacuum Protector Kit, you get the standard Coolant Saver along with a 660mm Steel Fabrication Vacuum Protector for Swarf Bins.

  • 660mm Length Square profile tube
  • Clamp to fix to swarf bin
  • Tough construction
  • Painted black
  • Easy suction cup removal (when bins require emptying)

The Wogaard Coolant Saver collects the cutting-fluid that is normally wasted through the machine tools automatic chip conveyor. The cutting fluid is reclaimed from the chip-container and returned to the machine tool’s main tank for re-use.

Cut the costs of cutting fluid by up to 50%

A ‘greener” business does not neccessarily mean an increase in operating costs. Environmental concerns should first and foremost be about re-using resources – making more with less. A lot of money can be saved by reducing water-consumption, re-using cutting fluid and recycling consumables.

On the road to ISO14001, you can reduce consumption of cutting fluid and water, reduced the amount of waste fluid collected and disposed of; and, end fluid leaks that create potential health and safety issues.

Application – Reclaim coolant from Chip bin and return to machine
Typical Usage – Soluble Coolant on machines with Conveyors. Neat oil up to 12 centistokes on Sliding head low rated pumps.

Kit Contains :
Coolant Saver Unit
Vacuum (Filtered) with 3m 6mm PU Hose *can be increased as much as 10 metres
1metre – 12mm Hose Outlet
Fittings – 1/2′ & 3/4′ T & Straight fitting Kit
Full step by step Guide *Technical Support available
Steel Fabrication Vacuum protector for Swarf Bins
1 Year Warranty

Up to 50% Coolant Saving
Reduced topping up

Swarf Value
Improved price for swarf without coolant

Up to 90% Saving in Disposal
Reduction in disposal cost to remove coolant

Improved Housekeeping
No coolant collecting outside the machine of leaking on the floor

Manpower Reduction
No manual intervention to empty coolant in swarf bin as it is done automatically
Only swarf will require emptying from the bin

Not only recycling coolant but NO external power or outside coolant leaks

Useful Information

Compact and easy to install

The Wogaard Coolant Saver is easy to install and is virtually maintenance free. It is driven by the machine tool’s onboard coolant pump, so no external energy source is required.


The Wogaard Coolant Saver can save up to 90% on the costs of waste coolant disposal. Furthermore, it saves considerable time spent by employees handling the cutting fluids. The chip-containers are dry when emptied, which prevents any spillage.

The Investment

The Wogaard Coolant Saver is a low-cost solution, ensuring an ROI well below 6 months

Increasing Costs?

Considering the long-term developments in the price levels of oil, water, energy and disposal, it pays to invest in a better utilization of cutting-fluids. The instability of many oil producing nations can cause sudden and significant changes to the cost of oil-based products, including cutting oils and coolants.


Operating Pressure – 1 to 45 Bar (not for use on higher pressure pumps)
Suction Capacity  -0.5 to 0.8bar (Valve control)
Collection Rate – Approx. 1Litre/min
Mounting – Can be used on Floor, waist or head high pumps to approx. 3m Height
Collection Tube Length – Vacuum Cup can be up to 10m from Coolant saver unit

Request Info

Nex Flow™ Products, Co. Ltd Bangna Residence Tower Unit No 207 324/35 Sanpawut Rd, Bangkok 10260, Thailand
Tel: 66 (0) 84 771 1224

Product Brochure